John Neuens
For recyclers involved with the rapidly expanding lithium-ion (Li-ion) and lithium iron phosphate (LiFePO4) battery recycling market, there is an ongoing debate within the industry concerning the merits and pitfalls of dry versus wet (water-based) processing.
Although dry battery recycling systems are prevalent, these typically require the disassembly of packs or modules and discharge of the individual battery cells before further processing and can be at risk of thermal events. Wet systems have distinct advantages in this regard and can be very efficient at recovering the most valuable materials but are largely misunderstood by those who may not be aware of recent advancements.
While both methods can be used to recycle these types of batteries, industry professionals are still largely undecided as to which method can be used most efficiently and cost effectively to meet their reclamation safety, quality, and production goals.
In the industry, there is some confusion over the role of dry and wet battery recycling methods. Some say wet processing is not feasible for Li-ion and LiFePO4 recycling, which is untrue. In many ways, it is safer, faster, and more efficient for recycling battery packs than dry processing. Over the last seven years, it has also been successfully implemented in multiple plants around the world.
Best Practices for Dry Recycling Systems
Despite the prevalence of dry battery recycling systems, there are several disadvantages. To start, the variety of batteries that must be dismantled from packs and discharged can make a dry system prohibitive from a cost and return on investment standpoint.
The reality is that there is tremendous variation in the sizes, chemistries, and construction of Li-ion and LiFePO4 batteries sourced across the globe, with essentially a thousand different arrangements and assemblies. The extent of the variety complicates creating battery recycling systems since there is no standardization in approach.
Today, all the battery packs are built differently, so there is no single method for discharge. If lithium battery design could have been standardized 30 years ago, perhaps a system might have been built with standardized methods and circuitry to allow for quick and easy discharging, but that point has long passed.
Since every battery cell must be discharged, there is often no easy, economical, profitable way to do it. In one method often used in the past, batteries are placed in a salt solution for several weeks to discharge, but this is messy, requires excessive space, and produces a chemical effluent that must be properly disposed. This too often requires disassembly labor and its dangers.
With dry systems, there can also be safety issues related to battery discharge. Outside of a lab, there is no practical or certain way of knowing if all the cells are fully discharged. In a large battery pack with thousands of cells, it is quite likely that at least a couple of cells can still be partially charged and create an unwanted reaction.
When dry processing Li-ion and LiFePO4 batteries, it can also be very challenging to control dangerous conditions like thermal runaway, self-generating oxygen that can lead to hazardous battery fires. Although robots could theoretically dismantle, discharge, and process the batteries, programming them to accommodate the wide variety of battery sizes and types would be cost prohibitive.
Dry battery recycling systems tend to be smaller to limit the volume of combustible material and the danger of thermal runaway, so they may not always meet throughput needs enough to be profitable.
A further difficulty is that battery manufacturers are now increasingly filling their packs and modules with a glue-like gel as a safety precaution, to keep the case together in case of damage from a collision or drop. However, this makes battery disassembly even more complex. Even the companies that manufacture them have no method of disassembly.
With a dry system, battery materials also get into the air system in large volumes during shredding and processing. Treating or separating these airborne materials is more difficult as well as more costly and dangerous.
Users face a tougher environmental challenge using a dry system because the battery electrolyte and VOCs that are more voluminous are now in the air system, along with the inert gas. As a result, they must filter, scrub, and thermal oxidize them off.
Best Practices for Wet Battery Recycling Systems
Due to the rapid pace of change in battery recycling technology, there are several common misperceptions regarding wet battery recycling systems today, even among industry professionals.
Among the most pervasive misunderstandings is that wet systems cannot remove âblack mass.â In Li-ion battery recycling, black mass consists of electrode coatings like metal oxides and carbon, which contain valuable elements like graphite, manganese, cobalt, nickel, and lithium. Recovering the black mass generates the greatest value for reuse or sale since otherwise there are usually only trace amounts of metals like lithium, copper, and aluminum.
A closed wet battery recycling system can capture black mass more effectively and at far improved purity if properly designed and built by companies experienced with these techniques.
All the other particles besides the black mass are very large, so they are relatively easy to filter and press out, dewater, and dry. The result is very clean, usable black mass, with the water able to be reused, utilizing a continuous water treatment system. The process essentially cuts and agitates the materials through the whole process to liberate the black mass from the foils in an aqueous solution and capture them without all the remnant plastics and particulate.
A turnkey wet Li-ion battery recycling system should combine several separate but complementary processes. The primary system shreds the batteries in inert atmosphere and water, and secondary systems further reduce the material to smaller, more separable sizes. The key best practice is specialized secondary shredding, a factor not well understood yet throughout the industry.
When material is recirculated through a standard shredder with a screen, it blinds and clogs the screen. However, a specialized shredder can be used to further reduce the material to a uniform size without the need for a screen. If that cannot be done in one pass, it takes multiple shredders to get the same product at far greater expense.
A secondary shredding step is accomplished using knife technology that reduces the material size to 3/8â inch. The knife technology is uniquely suited to wet battery recycling because it reduces to a predictable and regular size in one pass without screening, eliminating the concern over blinding.
Additional processing using proprietary chemical injections and drying methods captures valuable battery cell black mass from the shredded material before it goes through the entire system. The use of water in processing Li-ion and LiFePO4 batteries has other significant advantages, beginning with increasing safety by deterring thermal runaway.
Since the recyclable Li-ion battery material does not readily absorb water, it can be used to cool the materials and quash incipient fires. Combined with nitrogen to eliminate combustible oxygen, thermal events can be controlled and eliminated with a wet process. By preventing thermal events, processing is faster with higher battery weights and volumes possible.
The glues or gels also tend to float so can be easily handled in a wet recycling system.
If there is the ability to shred whole packs and whole modules all at once, these glues or gels tend to float, so they can be handled in a water stream very easily. In addition, a wet system can capture VOCs in the water, which can be filtered, so air filtration can be simple with just a scrubber and charcoal filtration.
If there is a drawback to wet battery recycling systems, it is that it involves several separate stages that must be sufficiently integrated by an experienced manufacturer. Consequently, manufacturers and recycling professionals usually will want an industry expert involved from the start, so a system can be built that is customized to their specific needs.
However, once installed, Li-ion and LiFePO4 batteries of all sizes and chemistries can be quickly and profitably reduced into valuable, reusable, or saleable materials without disassembly.
This type of flexible wet system can recycle tons of Li-ion or LiFePO4 material per hour to whatever sellable state is required. If users need to produce tons per hour instead of a fraction of a ton per hour, Hydro/Nitrogen systems will get them there much faster than a dry system.
For industry professionals still undecided about whether to consider a dry or wet battery recycling system, there are several different ways to design a Li-ion and LiFePO4 battery recycling system. The decision should be based on the facts and a good understanding of dry versus wet, as well as the types of advanced systems that are already being operated by some of the largest battery manufacturers and recyclers in the world.